Rotary #2020476
1985 Ingersoll Rand DM25
750/300 Compressor, KTA19 Cummins Deck Engine. Multi Pass Unit, 5 Rod
Carousel Loaded W/ Steel.Mounted On Tracks. Good Condition.
Rotary
#20181
72 Ingersoll Rand ECM 250
750/120 Compressor, 671 Detroit Diesel Deck Engine. Compressor Is A Sullair
Model 750DR Wagon Mount, Rig Engine Has Approx. 100 Hours On Rebuild, 5 1/2" URD
Hammer. Mounted On Tracks. Good Condition.
Rotary #20750
2000 Ingersoll Rand RD20
1070/350 Compressor, QSK Cummins Deck Engine. Range III Derrick, Deck Engine
Replaced New In October 2006 W/ Approx. 4,000 Hrs. Drill time, New Main
Pumps, Fan Motors, Fan Pump, Two Spool Valve & Main Control Valve Replaced
Fall 2007, Whisperwatt 15 Generator Mounted Behind Cab For Doghouse Power,
Includes (2) 2006 Sullair 1150/350 Auxiliary Compressors P/B Cat Engines
Mounted On Trailer W/ Approx. 5,000 Hrs, Doghouse W/ Porch & 3,000 Gallon
Fuel Cell Mounted On 40' Trailer, (2) Pipe Tubs W/ Tugger Winch Mounts, 2'
Subbase Single Unit W/ Fold Down Ramp, 3,500' Of Range II 4 1/2" Drill Pipe,
12" & 8" CenterRock Hammers W/ Stabilizers, Subs, 3,000# Regan BOP & Airbow,
Hydraulic Tugger Winch, Air Slips, Working Rig. Mounted On 2000 4-Axle CCC,
w/ Cummins. Good Condition.
Rotary #20842
69 Ingersoll Rand T4
Rebuilt 600/125 Compressor, 8V71 Detroit Deck Engine. 5" Feed Cylinder, 54,000 Pullback, Rod Rack,
Misc. Tools And Bits, 675' Of Drill Pipe,
5199 Hours On Machine, Carrier Has 23,XXX Miles, Fuller Transmission. Good
Paint.
Mounted On 69 CCC, w/ 501 Gas. Good Condition.
Rotary #20851
80 Ingersoll Rand T4W
900/350 Compressor, KTA19C Cummins Deck Engine. 1000' Of 4 1/2 X 3 1/2 X 25'
Drill Pipe, Atlas Copco Surface And Down Hole Hammers, Chain Wrench, Cold
Start Pre-Heat System, Carousel, Oiler, (3) Hyd. Jacks, Injection Pump,
225 Miller Bobcat Welder, International S1700 Support Truck With Diesel Engine, 5 Speed With 2 Speed Rearend, 4 Underbed Tool Boxes And Box On Deck. Mounted On 80 CCC, w/
L10
Cummins. Good Condition.
Rotary #120198
1988 Ingersoll Rand T3W
825/350 Compressor, Cummins Deck Engine. Low Hours On Complete Refurb. 7 Rod
Carousel, Rod Rack, (4) Hyd. Jacks, Cat Injection Pump, Hammer Oiler, Foam
Injection, 18K Lb. Winch, 340' Of 4 1/2" Drill Pipe, 4 Motor Tophead, 13
Speed Trans. In Truck, Approx. 45K Miles. Mounted On 1988 International, w/
DT466. Excellent Condition.
Rotary #120591
1991 Ingersoll Rand T3W
825/350 Compressor, 5 X 6 GD Mud Pump, KTA 19 Cummins Deck Engine. Casing
Hammer Derrick, 29K Lb. Pullback, 18K Lb. Winch, 18" Table Opening, Sandline,
7 Rod Carousel, Rod Rack, 4 1/2" Pipe Setup, (4) Hydraulic Leveling Jacks,
10 GPM Bean Injection Pump, Hammer Oiler, All Hand Tools, 8 Speed Fuller
Transmission In Truck W/ Lo-Lo, Approx. 9,000 Hrs. On Rig & 66K Miles On
Truck. Mounted On 1991 International Paystar, w/ 350 Cummins. Good
Condition.
Rotary #20849
1995 Ingersoll Rand T3W
900/350 Compressor, 3406 Cat Deck Engine. Casing Hammer Derrick, 7 Rod
Carousel, 18 GPM Inj. Pump, Hammer Oiler, (4) Hyd. Jacks, 520' Of 4 1/2"
Pipe, 5", 6" And 8" Hammers, 1,000 Hrs. On Deck Engine, 2500 Hrs. On
Hydraulics, Approx. 10,000 Total Hrs. Mounted On 1995 Ford 9000, w/ 425 HP
Cat. Good Condition.
Rotary #20674
2003
Ingersoll Rand T4
1070/350 Compressor, PTO, Cummins Deck Engine. 50K Pull Back, 1800' Of Drilling
Pipe, All Hand Tool's & Subs, Approx. 3800 Hours On The Machine And 36,000
Approx. Miles On Carrier. Mounted On CCC, w/ C12 CAT. Good Condition.
Rotary #20773
1974 Ingersoll Rand T4
750/250 Compressor, 12V71 Detroit Deck Engine. Approx. 700 Hrs. On
Compressor Since Rebuild, 875' Of 4 1/2" X 25' Drill Pipe, (2) 6" Hammers W/
Bits, Georoc Casing Advance System For 7" Casing, Misc. Bits & Hand Tools,
Includes 1985 International W/ DT466 Single Axle Flatbed To Carry Extra
Drill Pipe, Trailer Mounted 5 X 6 Air Operated Mud Pump W/ All Hoses & Pit.
Mounted On 1974 CCC, w/ 6V53. Good Condition.
Rotary #20790
1974 Ingersoll Rand T4W
900/350 Sullair Compressor, 8V92 Silver Deck Engine. Compressor Has Approx.
2500 Hrs., Reman Deck Engine Has Approx. 1500 Hrs., 7 & 4 Rod Carousel, 240'
Of 4 1/2" x 20' Drill Pipe, 6" Hammer, Bean Injection Pump, Hammer Oiler,
(3) Hydraulic Leveling Jacks, New Main Pump, New Chains, Additional Drill
Pipe & Water Truck Available. Mounted On 1974 CCC, w/ 350 Cummins. Good
Condition.
Rotary #120225
81 Ingersoll Rand T4
900/350 Compressor, 12V71 Detroit Deck Engine. 500 Hours On New Deck Engine,
37,500 Pullback, Worm Gear, 300' Of 4 1/2" Drill Pipe, 6" Hammer, 25 GPM Cat
Injection, New Holte Oiler, (2) Carousels, Standard Tools, 19K Miles On
Carrier, 13 Speed Roadranger W/ Jake Brake, One Owner Machine. Mounted On 81
CCC, w/ 6V71. Very Good Condition.
Rotary #20754
1988 Ingersoll Rand T4
900/350 Compressor, KTA 19 Cummins Deck Engine. Less Than 1,000 Hrs. On
Engine & Compressor, Standard 37.5K Lbs. Pullback, 300' Of New 4 1/2" Drill
Pipe, Two Carousels, Worm Gearhead, Electric Oiler, 10GPM Bean Injection
Pump, (3) Hydraulic Leveling Jacks. Mounted On 1988 CCC, w/ Cummins. Good
Condition.
Rotary #20826
1990 Ingersoll Rand T4BH
900/350 Compressor, KT19 Cummins Deck Engine. 5 Rod Carousel, Operators Cab,
Night Lights, (3) Hyd. Jacks, Water Inj. Pump. 125' Of 4 1/2" Drill Pipe,
All Hand Tools, 55 Gallon Hammer Oiler, Spur Head. Mounted On 90 CCC, w/ L-10
Cummins. Good Condition.
Rotary #120826
1996 Ingersoll Rand T4BH
900/350 Compressor, KT19 Cummins Deck Engine. 5 Rod Carousel, Night Lights,
(3) Hyd. Jacks, Operators Cab, Water Inj. Pump. 125' Of 4 1/2" Drill Pipe,
All Hand Tools, 55 Gallon Hammer Oiler, Spur Head, (2) Coolers. Mounted On 1996 CCC, w/ L-10
Cummins. Good Condition.
Rotary #120462
1996 Ingersoll Rand T4W
1050/350 Compressor, QSK19C Cummins Deck Engine. Deck Engine Needs To Be
Rebuilt, New Compressor Oct. 06, New Double Hyd. Pump, New Main Hyd. Pump &
New Slow Feed Pump In 08, 7 Rod Carousel, Double Motor Spur Gearhead, 4 Cyl.
Bean Pump, Angle Package, Standard Pullback. Mounted On 1996 CCC, w/ L10
Cummins. Good Condition.
Rotary #820475
1997 Ingersoll Rand T4W
1250/350 Compressor, QSK19 Cummins Deck Engine. 50K Lb. Pullback, Aprox.
7100 Hrs., 25 GPM Injection Pump, Hammer Oiler, Double Pump Replaced 8/04,
Ford Motor Pump And Valve Replaced 8/04, Head Rebuilt 2/04. Mounted On 1997
4 Axle CCC, w/ M 11 Cummins. Very Good Condition.
Rotary #1928
77 Ingersoll Rand TH55
50 SDS Leroi Compressor, 3 X 4 Mission Mud Pump, PTO, No Deck Engine.
220' Of 3" Flush Joint Drill Stem, Bean Injection Pump, Rod Rack, New Hydraulic
Pump In 2000.
Mounted On 78 International Loadstar, w/ DT466 Diesel.
Good Condition.
Rotary #20528
93 Ingersoll Rand TH55M
300/200 Compressor, 4X3 MCM Mud Pump, PTO, NO Deck Engine. 9 Rod Carousel,
Water Injection, Sand Reel, Jib Boom, 3 1/2" X 20' Rods 2 3/8" IF, Rebuilt
Bowie Grout Pump, New Gauges As Needed, New Air Cylinder On Flat Wrench,
Several Other Repairs Done To Machine. Mounted On Ford, w/ Diesel. Good
Condition.
Rotary #20839
1978 Ingersoll Rand TH60
600/250 Compressor, 5 X 6 Mud Pump, PTO, NO Deck Engine. (3) Hyd. Jacks, 9
Rod Carousel, Myers Water Injection, Sandline, Desander, Air Axle, Includes
200' Of 20' 3 1/2 Rod, 75' Of 15' 3 1/2, 10' Of 10' 3 1/2 Pipe. Mounted On
1977 International Paystar, w/ 8V71 Detroit. Fair Condition.
Rotary #20607
86 Ingersoll Rand TH60
750/250 Compressor, PTO, No Deck Engine. 740' Of 4 1/2" Pipe, 11 1/2"
Stabilizer, Rod Rack, Carousel, 18 GPM Bean Injector, Oiler, Cotta Box Rebuilt 1
Year Ago, New Style 4 Motor Tophead, Truck Engine Rebuilt 4 Years Ago, Truck Has
Jake Brake. Mounted On 85 GMC General, w/ 8V92 Detroit. Very Good Condition.
Rotary #20734
1971 Ingersoll Rand TH60
600/250 Compressor, 3 X 4 Mud Pump, PTO, No Deck Engine. Rig Has Had Many
Recent Repairs & Rebuilds, 7 Rod Carousel, 300' Of 4" Drill Pipe, 3L6 Moyno
Pump For Grouting, (4) Hyd. Jacks, Sandline, 18,000 Lb. Winch, Standard
Mast. Mounted On 1972 Ford, w/ Cummins. Very Good Condition.
Rotary #20692
74 Ingersoll Rand TH60
600/250 Compressor, 4X2 Mud Pump, PTO, NO Deck Engine. 14 Speed Spicer, 7
Rod Carousel, Rod Rack, Bean Injection Pump, 240' Of 4 1/2 Pipe, Transfer
Case Had Been Rebuilt, 3 Hyd. Jack, Stabilizer, Bits Mounted On 74 Dodge
9000, w/ 230 Cummins. Fair Condition.
Rotary #20774
1975 Ingersoll Rand TH60
256 Leroi Compressor, PTO, No Deck Engine. Replaced All Air Over Hydraulics
With Straight Hydraulic Valves, 360 Ft. Of 4 1/2" Drill Rod, 20Ft 8"
Stabilizer, 6" Hammer Bit, 5" Hammer Bit. Mounted On Ford, w/ 8V92 Detroit
Diesel. Good Condition.
Rotary #20762
1983 Ingersoll Rand TH60
750/250 Compressor, 5 X 6 Mud Pump, PTO, No Deck Engine. New Pulldown
Cables, New Swivel, New Bearings In Tophead, PTO Rebuilt, 32' Mast, Hammer
Oiler, Bean Injection Pump, 380' Of 4 1/2" Drill Pipe, (4) Hydraulic
Leveling Jacks, 7 Rod Carousel, Rig Also Has 3 X 4 Mission Mud Pump. Mounted
On 1981 International Paystar, w/ 8V92. Very Good Condition.
Rotary #20706
1985 Ingersoll Rand TH60
750/250 Compressor, G.D. 5 X 6 Mud Pump, PTO, No Deck Engine. 38' Derrick,
Recent Repairs Include New King Head, New Hyd. Pump, New Three Motor Gear
Box, New Hyd. Motor Cylinder & Gearbox For Carousel, New Clutch & Bearings
On Compressor, New Clutch On Truck Engine, New Cables Except For Winch Line,
New U-Joints, Rebuilt Pipe Rack, 1550 Hours On Engine, Valve Bank Needs
Work. Mounted On 1985 International Paystar, w/ Detroit. Good Condition.
Rotary #12518
2001 Ingersoll Rand TH60
825/350 Compressor, 3 X 4 Mission Mud Pump, PTO, No Deck Engine. 10 Speed
Spicer Transmission, 32' Derrick, 9 Rod Carousel, 18 GPM Bean Water
Injection, 18,000 Lb. Winch. Mounted On 2001 Paystar 5600, w/ C15 Cat.
Once again we thank you for visiting
this page of our catalog. Please be
sure to contact us for more information on our drilling equipment. Please
check this page out frequently as we list new drill rigs daily. If you
have drilling equipment that you would like to list with us please feel free to
submit your listings using one of the following methods:
Jiffy
Form
E-mail
Call
toll FREE (800) 292-7447
Thank you for the opportunity to share our drilling equipment
with you. We look forward to serving you and your fine company!
Call for More Details 1-800-292-RIGS
Disclaimer:
The Company offers the details of these vessels in good faith but cannot guarantee
or warrant the accuracy of this information nor warrant the condition of the
vessels. A buyer should instruct his agents, or his surveyors, to investigate
such details as the buyer desires validated. These vessels are offered subject to
prior sale, price change, or withdrawal without notice.
Home
Catalog Index
Rotary Drills Bucket Rigs
Cable Tool Rigs
Oilfield Equip.
Misc. Items
Pump Hoist Water Trucks
Parts & Components
Jiffy Form
Pics Of Month
New Pipe & Equip. Trailers
Spanish Index
Spanish Oilfield
Freight Forwarding
Wanted Equip. Contact Us
Rotary #2020476
Rotary
#20181
Rotary #20750
Rotary #20842
Rotary #20851
Rotary #120198
Rotary #120591
Rotary #20849
Rotary #20674
Rotary #20773
Rotary #20790
Rotary #120225
Rotary #20754
Rotary #20826
Rotary #120826
Rotary #120462
Rotary #820475
Rotary #20528
Rotary #20839
Rotary #20734
Rotary #20692
Rotary #20774
Rotary #20762
Rotary #20706
Rotary #12518