Thank You For Visiting the Higgins Rig Co Oilfield Equipment Section Of Our Catalog.  The Pictures of the  Equipment Can Be Enlarged By Clicking On The Picture Or The Equipment #.  If you require further pictures, more information or you do not see the equipment that meets your needs please feel free to contact us in one of the following ways:

Jiffy Form
E-mail
Call toll FREE (800) 292-7447

Home   Catalog Index  Rotary Drills   Bucket Rigs   Cable Tool Rigs       Oilfield Equip.   Misc. Items    Pump Hoist   Water Trucks   Parts & Components   Jiffy Form    Pics Of Month   New Pipe & Equip. Trailers   Spanish Index   Spanish Oilfield   Freight Forwarding   Wanted Equip.   Contact Us

Workover #20779
1981 Cooper 32-32
471 Detroit Deck Engine. 60' Pemco Derrick W/ Fingerboard, (4) Hydraulic Leveling Jacks, Hydraulic Tool Line, Quick Connect For Tongs, Approx. 3,000' Of 9/16" Sandline, Air Slips, BJ Tongs & Other Tooling Available. Mounted On 1985 Freightliner, w/ 400 Cummins. Excellent Condition.
 

Rotary #20763
1979 Ideco Rambler H37
12V71 Detroit Deck Engine. 104' Telescoping Mast Hydraulically Raised & Scoped, Single Drum Rig, Parmac 15" Double Hydromatic Brake, New 27 1/2" Rotary Table, Ideco 200 Ton Swivel, New 4 1/4" x 40' Square Kelly, Ideco Shorty 150 Ton Block/Hook Combination W/ 4 Sheaves, 8' Substructure W/ Rotary Beams, Stairs, Safety Rails, (2) 8' X 40' Insulated Doghouse W/ LPG Heater, Lockers, Tool Racks, 2,000 Gallon Fuel Tank, BJ Type B Tongs, Wilson 600 Duplex Mud Pump, Skid Mounted P/B Twin 671 Detroits, Emsco D-300 Duplex Pump Skid Mounted P/B Twin 671 Detroits, 74 Joints Of 4 1/2" Range II Drill Pipe, Collars, Cat 977H Dozer, Komatsu PL160 Excavator, (2) 40' Floats, Mud System, Equipment Is Currently Drilling, Call For Complete Details. Mounted On 1979 5-Axle CCC. Good Condition.
 

Rotary #20750
2000 Ingersoll Rand RD20
1070/350 Compressor, QSK Cummins Deck Engine. Range III Derrick, Deck Engine Replaced New In October 2006 W/ Approx. 4,000 Hrs. Drill time, New Main Pumps, Fan Motors, Fan Pump, Two Spool Valve & Main Control Valve Replaced Fall 2007, Whisperwatt 15 Generator Mounted Behind Cab For Doghouse Power, Includes (2) 2006 Sullair 1150/350 Auxiliary Compressors P/B Cat Engines Mounted On Trailer W/ Approx. 5,000 Hrs, Doghouse W/ Porch & 3,000 Gallon Fuel Cell Mounted On 40' Trailer, (2) Pipe Tubs W/ Tugger Winch Mounts, 2' Subbase Single Unit W/ Fold Down Ramp, 3,500' Of Range II 4 1/2" Drill Pipe, 12" & 8" CenterRock Hammers W/ Stabilizers, Subs, 3,000# Regan BOP & Airbow, Hydrauic Tugger Winch, Air Slips, Working Rig. Mounted On 2000 4-Axle CCC, w/ Cummins. Good Condition.
 

Rotary #20652
12V92 Detroit Deck Engine.
97' Lee C. Moore Mast, Bethlehem 60 Drawworks With Foster Make Up & Breakout Catheads Air Clutches, 17 1/2" Brewster Table, 5 Sheave Block, 150 Ton Howard Turner Swivel, Kelly, Substructure, National K-380 Pump Powered By 671 Detroit, National 14" Mud Pump Powered By D379 CAT, Doghouse, Generator Pipe Racks, Water Tank, 6,000 Of 3 1/2 " Bottle Neck Pipe, 2700' of 4 1/2" X-Hole Drill Pipe, Drill Collars, Call For More Details. Good Condition.
 

Rotary #20615
97' Lee C. D60K Moore                                                                                                                                    Derrick Refurbished To Original Specs, National T20 Refurbished Drawworks, 3' Ramp W/ 6' One Piece Sub Base, Doghouse W/ Tool Room & Locker Room, (2) 475 Barrell Water Tanks W/ Centrifugal Pump, 5000 Gallon Fuel Tank On 48' Float, 150KW Genset P/B New Detroit, 17 1/2" Rotary Table--Refurbished, 120 Ton Refurbished Brewster Swivel, Set BJ Type B Tongs, Set BJ 2 3/4" x 72 Links, McKissick 48 X 30 Blocks, BJ460 Spring Loaded Hook, New 4 1/2" Slips, New 5 1/2" Collar Slips, 4 1/2" x 40' Kelly, New Bushing, New Catwalk, (3) Pipe Tubs, 5,000' Of 4 1/2" X-Hole White & Yellow Band, Gardner Denver FXQ Mud Pump W/ Twn 671 Detroits, (3) Pit Jets, Boom Line, 1 1/8" Drill Line, 100 Barrel Pre-Mix Refurbished Mud Mixer, New Stairs & Railings, Pipe Racks, Rig P/B Two Overhauled 12V71 Detroit Engines. Very Good Condition.

Rotary #20641
Lee C. Moore                                                                                                                                             127' X 600,000 # Mast With Crown Block (5) Sheave Cluster & 1 Fast Line Sheave, Emsco 6-42 Single Drum Drawworks, Racking Board, Substructure, (1) GD KX6-172 Duplex Mud Pump, 1GD KXG-172 Stand By Duplex Pump, Pump Powered By 12V92 Detroit Diesel, Ideco 175 17 1/2" Rotary Table with Split Master Bushings, Emsco AE6-E Swivel, 4 1/4" Kelly, Brewster 300 Ton Block With Byron Jackson 4200, 200 Ton Hook, Tool Pushers Trailer, 1K Gallon Plastic Water Tank, Dog House, Parts House, Change House, Generators, Mud System Fuel & Water Tanks, Weight Indicator, Bear Automatic Driller, Recorder Handling Tools, 10,000' Of 4 1/2 Drill Pipe, Drill Collars, Call For More Details, Gen Sets.  Excellent Condition.
 

Rotary #120672
Brewster N35
8V71 Detroit Deck Engine. Single Drum Drilling Rig Includes 142 Joints Of 3 1/2" Drill Pipe, 8 X 10 Doghouse, (3) 45' Oilfield Floats, (12) 6 1/8" Drill Collars, (10) 4 1/2" Drill Collars, 130 BBL Water Trailer, 7 1/4" x 14 Gardner Denver Mud Pump Skidded W/ Cummins Engine, 1000 Gallon Fuel Tank, 1971 International Winch Truck, 9" BOP, Allis Chalmers Forklift. Mounted On 3-Axle Trailer. Very Good Condition.
 

Rotary #21070
Cardwell
145 Waukesha Deck Engine. Jaw Clutches, No Line, No Tools, Double Drum, Double Pole, Rated 7500', Comes with 3000' Used 9/16 Line. New Paint Job. Mounted On Skid. Good Condition.
 

Service Rig #320620
Wichtex
300 Ford Ind. Deck Engine. Single Pole, Approx. 2500' To 3,000' Of Sandline. Mounted On 1981 Ford F-600, w/ Gas. Good Condition.
 

Service Rig #120620
Cardwell
Waukesha Deck Engine. 8 1/2 X 7 Single Pole, Jerk Arm, New Tubling Line, 5000' Of 5/8" Line On Both Drums, All Hydraulic Rig, (4) Hydraulic Jacks, 50' Pole. Mounted On Trailer.  Good Condition.
 

Workover Rig #31070
Cardwell Spudder
135 Waukesha Deck Engine. Double Drum, Single Pole, Air Clutches, 3000' 9/16 Lines, No Line On Other Drum, No Tools. Mounted On Trailer. Great Condition.

Rotary #20625
Failing Strat 90
400 NTC Cummins Deck Engine. 87' x 100,000 Lb. Lee C. Moore Double Derrick, 100 Ton Block, 18" Failing Rotary Table, Triple Hydro Brake, Three Hydraulic Leveling Jacks, Hydraulic Wireline, Hydraulic Raising Walkways, Includes 7 1/4" x 14 Oilwell Mud Pump Mounted On New Skid P/B 440 Cummins---Fluid End Rebuilt, 7 1/4" x 10 Emsco Mud Pump Skidded W/ 350 Cummins & 150 Gallon Fuel Tank, 6 X 12 Oilwell Duplex Pump P/B 300 Big Cam Cummins W/ 150 Gallon Fuel Tank, 40' Pipe Float, Doghouse Mounted On 35' Float W/ 500 Gallon Fuel Tank, 400 BBL Laydown Water Tank, 50 Joints Of 3 1/2" Yellow Band Drill Pipe W/ Papers, Drill Collars, Elevators, Subs, Wrenches, Bit Breakers, Type C BJ Tongs, Geolograph, Lincoln Ranger 10,000 Welder, 1981 Autocar Winch Truck W/ 60,000 Lb. Tulsa Winch W/ 5th Wheel Setup, 1976 Peterbuilt Winch Truck W/ 60,000 Lb. Tulsa Winch, 20' Bed W/ Gin Poles & Full Tolling Tailboard, Call For Complete Inventory & Details.Mounted On 3-Axle Trailer. Excellent Condition.


 

Rotary #120473
Failing Strat 100
12V71 Deck Engine.  96' X 200,000 lbs. Mast, 18" Howard Turner Table, Two Foster Catheads, Single Drum, 1" Cable, 8 Line 150 Ton McKissick Block, Water Brakes, 750 Allison Transmission. Mounted On Trailer.  Very Good Condition.

Rotary #1520476
1978 Gardner Denver 17W
900/350 Compressor, 5 X 6 Mud Pump, PTO, No Deck Engine. No Hours On Compressor & Mud Pump Since Rebuild, Tophead Drive Rig, Rod Rack, (4) Hydraulic Jacks, Bean Injection Pump, 38' Mast, Mounted On 1978 4-Axle CCC, w/ Cummins. Very Good Condition.
 

Rotary #20695
Gardner Denver 2500
7 1/4 X 14 GD Mud Pump, PTO Deck Engine. 18" Table, 3600' X 3 1/2 Drill Pipe, (6) Drill Collars, Float With Dog House, Fuel Tank, Bits, Pipe Racks, Compressor, Air Clutches. Mounted On Trailer, w/ Cummins Diesel. Good Condition.

Rotary #20783
1999 Schramm 685WS
1360/350 Sullair Compressor, 760HP MTU Detroit Deck Engine. Approx. 5989 Total Hours On Rig & 2962 Hrs. On New Engine, 75K Lb. Pullback, 1450' Of 4" X 25' Drill Pipe, 5 & 8 Rod Carousel, 25 GPM Cat Injection Pump, Inlet Compressor Control, 144K In/Lbs. Head Torque, 28" Table Opening, Jib Boom, Rod Rack, Hammer Oiler, (3) Hydraulic Leveling Jacks, Floating Sub, 6" & 8" Hammers, Holte Casing Perforator, 25' Drill Collar, Casing Advancement System For 7" Pipe, Lots Of Misc. Tools & Parts, Approx. 15K Miles On Truck, Also Includes 1999 Ford Sterling W/ 2000 Gallon Rosewall Water Tank W/ 6,000Lb. Liftmore Crane W/ Remote, 140 Gallon Hydraulic Water Transfer Pump, 200 Gallon Fuel Tank, Tool Cabinets W/ Torch Reel, Approx. 95K Miles On Water Truck. Rig Can Be Bought Separately. Mounted On 1999 International 2675, w/ 400HP M11 Cummins. Excellent Condition.

 

Rotary #120594
1972 Skytop-Brewster
PTO, No Deck Engine.  18" Failing Rotary Table, 54' Mast, Skytop H328 Drawworks W/ Wichita Air Clutches & (2) 32 X 8" Brake Drums, Hydraulic Utility Winch, (4) Hydraulic Jacks, SOWA Three Sheave Block, 75,000# Packer Jr. Weight Indicator, 25XV King Swivel, 26' Fluted Kelly W/ 3.5" IF Pin, Hydraulic Breakout Cylinder, Webb Wilson Type C Breakout Tongs, Pipe Elevator, Set Of Box X Box Bit Subs For API Bits & 3.5" Pipe, Skid Mounted 7 1/4" X 10" Gardner Denver Mud Pump With 671 Detroit Engine W/ Mud Gauge Lines, & Relief Valve, 8' X 20' Doghouse Mounted On Skid, 3 1/2" Pipe Available. Mounted On 1972 CCC, w/ 6V71 Detroit. Good Condition.

Rotary #20570
74 Skytop Brewster 550
PTO, NO Deck Engine.  110' X 275,000 # Derrick, Hydraulic Raised Scoped, Fluorescent Lighting, New 18" Howard Turner Table, 11' Back On Sub Base On Mud Boat, 125 Ton Swivel, Make Up And Breakout Hydraulic Cylinders, 250 KW Generator P/B 3406 Cat, Dog House, Active Mud Systems, 310 BBL Capacity, Mission Pumps, Ellis Williams Duplex Mud Pump P/B 600 HP Cat, 4700' Of 4 1/2" Drill Pipe, Drill Collars, Cat Walks, (4) 40' Pipe Racks, 3000 Gallon Fuel Tank. Call For Complete Details. Mounted On 1974 5 Axle CCC, w/ Series 60 Detroit 500 HP.  Excellent Condition.

 

Workover Rig #20672
Wilson Super 38
PTO, No Deck Engine. Single/Double, 130K Lb. Derrick., Needs Cable. Mounted On 4 Axle CCC, w/ 6 Cyl. Detroit. Good Condition.
 

Rotary #20626
Wilson Mogul 42
96' X 250,000# Capacity, Racking Board, Martin Decker Weight Indicator, Winch, Substructure, Stairways, Ideco Rotary Table, Oilwell Swivel, Mud & Air System, Generator, Misc. Equipment & Parts, Working Rig, Call For More Details. Mounted On 4 Axle CCC.  Very Good Condition.

 

Air Booster #51052
Joy WB-8X7
6V53 Detroit Diesel Deck Engine. Air Starter, 2 Cylinders, New Coolers, 1700 CFM, 600 PSI. Mounted On Brigadier Truck. Good Condition.

Cement Truck #20801
5 X 4 Transmission In Truck, 18,000 Lb. Front Axle, 50,000 Lb. Rears, OPT S00 Pump 10,000 PSI, 4" Plungers Driven By 6V92T Detroit W/ 10 Speed Trans., (1) Gaso 1654C Pump Driven From Truck Engine, Demco 4" x 3" Mixing Pump Hydraulically Driven, LaBour 6" x 4" Charging Pump Hydraulicaly Driven, 20 BBL Measuring Tanks, (3) Chicksans, (3) Chicksans Loops, Mixing Tub & Hopper. Mounted On 1982 International Paystar, w/ 300 Cummins. Fair Condition.
 

Compressor #20718
1987 GHH
1100/350 Compressor, 3408 Cat Turbo Deck Engine. New Drive Coupler, Meter Reads 5434 Hrs. Mounted On Skid. Good Condition.

Compressor #120779
1997 Sullair 900/350
Cat Deck Engine. Whisperized Unit, Ready For Work. Mounted On Trailer. Good Condition.

Compressor #220779
2002 Sullair 900/350
Cat Deck Engine. Whisperized Unit, Approx. 17,000 Hours. Mounted On Trailer. Good Condition.

Drill Pipe #620779
Over 5,000' Of 5 1/2" Fullhole Pipe X 4" ID Range II, Call For Price..

Generator #320779
Magnum MMG180
John Deere Diesel Deck Engine. 180KW, Workhorse Generator, Quiet Operation. Mounted On Skid. Good Condition.

Mud Pump #2320476
Gardner Denver 5 1/2 x 8
All New Parts In Gear End & Fluid End. Mounted On Skid. New Condition.
 

Mud Pump #420779
Gardner Denver 5 X 10
Field Ready. Mounted On Slid. Very Good Condition.

Service Rig #20765
Bissinger & Stein 3210
6V71 Detroit Diesel Deck Engine. Double Drum, 10 3/4" X 8 5/8" Double Poles, (4) Hydraulic Leveling Jacks, (2) Hydraulic Mast Raising Cylinders, (1) Hydraulic Mast Scoping Cylinder, Hydraulic Hand Winch, 8,000' Of 9/16" Sandline, 5 Speed Trans. On Deck Engine, 5  Sheave Mast Head W/ 24" Sheaves, BJ Power Tongs, Air Slips, Oil Saver, Elevators, Rod Wrenches, Truck Has 18K lB. Front Axle & 40K Lb. Rears, Double Frame, Jake Brake, 8 Speed Fuller Trans. W/ Lo-Lo, Field Ready. Mounted On 1984 International, w/ L10 240HP Cummins.
 

Winch Truck #1820476
Rebuilt Tulsa 64 Main Winch, Full Rolling Tailboard, Telescoping Gin Poles, Secondary Tulsa 34 Winch Available, New Line On Winch. Mounted On 1977 International, w/ Cummins. Very Good Condition.


 

Once again we thank you for visiting this page of our catalog.   Please be sure to contact us for more information on our drilling equipment.  Please check this page out frequently as we list new drill rigs daily.  If you have drilling equipment that you would like to list with us please feel free to submit your listings  using one of the following methods:

Jiffy Form
E-mail
Call toll FREE (800) 292-7447

Thank you for the opportunity to share our drilling equipment with you.  We look forward to serving you and your fine company!

Call for More Details 1-800-292-RIGS

Disclaimer:
The Company offers the details of these vessels in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessels. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. These vessels are offered subject to prior sale, price change, or withdrawal without notice.

Home   Catalog Index  Rotary Drills   Bucket Rigs   Cable Tool Rigs       Oilfield Equip.   Misc. Items    Pump Hoist   Water Trucks   Parts & Components   Jiffy Form    Pics Of Month   New Pipe & Equip. Trailers   Spanish Index   Spanish Oilfield   Freight Forwarding   Wanted Equip.   Contact Us